Document
T16T
Snubberless™, logic level and standard 16 A Triacs
A2
G A1
A1 A2 G
TO-220AB insulated (T16xxT-6I)
Features
• Medium current Triac • High static and dynamic commutation • Low thermal resistance with clip bonding • Packages is RoHS (2002/95/EC) compliant • 600 V VRM • UL certified (ref. file E81734)
Applications
• Value sensitive application • General purpose ac line load switching • Motor control circuits in power tools • Small home appliances, lighting • Inrush current limiting circuits • Overvoltage crowbar protection
Datasheet - production data
Description
Available in through-hole, the T16T series of Triacs can be used as on/off or phase angle control function in general purpose ac switching where high commutation capability is required.
This series can be designed-in in many value sensitive appliances thanks to the parameters guidance provided in the following pages.
Provides insulation rated at 2500 V rms (TO-220AB insulated package).
Table 1. Device summary
Order code
Symbol
Value
T1610T-6I
T1620T-6I T1635T-6I
IGT 3Q logic level
IGT 3Q Snubberless
10 mA 20 / 35 mA
TM: Snubberless is a trademark of STMicroelectronics
June 2014
This is information on a product in full production.
DocID16488 Rev 3
1/9
www.st.com
Characteristics
T16T
1
Characteristics
Table 2. Absolute maximum ratings (limiting values; Tj = 25 °C, unless otherwise specified)
Symbol
Parameter
Value
Unit
IT(RMS) On-state rms current (full sine wave)
ITSM
Non repetitive surge peak on-state current (full cycle, Tj initial = 25 °C)
I²t I²t Value for fusing
dI/dt
VDSM / VRSM IGM PG(AV) Tstg
Tj
Critical rate of rise of on-state current IG = 2 x IGT tr ≤ 100 ns Non repetitive surge peak off-state voltage
Peak gate current
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
F = 50 Hz F = 60 Hz tp = 10 ms F = 60 Hz
tp = 10 ms tp = 20 µs
Tc = 86 °C
16
A
tp = 20 ms
120
A
tp = 16.7 ms
126
105
A²s
Tj = 125 °C
50
A/µs
Tj = 25 °C
VDRM/VRRM + 100
V
Tj = 125 °C
4
A
Tj = 125 °C
1
W
- 40 to + 150 °C
- 40 to + 125 °C
2/9
DocID16488 Rev 3
T16T
Characteristics
Symbol
Table 3. Electrical characteristics (Tj = 25 °C, unless otherwise specified)
Test conditions
Quadrant
T16xxT Unit
T1610T T1620T T1635T
IGT (1) VD = 12 V RL = 30 W
VGT
VGD IH (2)
VD = VDRM, RL = 3.3 kW, Tj = 25 °C
VD = VDRM, RL = 3.3 kW, Tj = 125 °C
IT = 500 mA
IL
IG = 1.2 IGT
dV/dt (2) VD = 67% VDRM, gate open
(dV/dt)c = 0.1 V/µs (dV/dt)c = 10 V/µs Without snubber (di/dt)c (2) (dV/dt)c = 0.1 V/µs (dV/dt)c = 10 V/µs Without snubber
I - II - III
10
20
35
MAX.
mA
IV
ALL
MAX.
1.3
V
ALL
MIN.
0.2
V
MAX. 12
25
40
mA
I - III
20
35
50
IV
MAX.
mA
II
30
40
80
Tj = 125 °C Tj = 150 °C(3)
100 1000 2000
MIN.
V/µs
20
500 1000
8
Tj = 125 °C
4
MIN. 3
Tj = 150 °C(3)
1
6
16
A/ms
3
12
1. minimum IGT is guaranted at 5% of IGT max. 2. for both polarities of A2 referenced to A1. 3. derating .