Triac. TPDV1240RG Datasheet

TPDV1240RG Triac. Datasheet pdf. Equivalent

Part TPDV1240RG
Description Triac
Feature isc Triacs TPDV1240RG FEATURES ·With TOP3 insulated package ·Be suitable for general purpose where.
Manufacture INCHANGE
Datasheet
Download TPDV1240RG Datasheet

TPDVxx40 $ * $ $ $ * 723LQVXODWHG Features • On-state TPDV1240RG Datasheet
isc Triacs TPDV1240RG FEATURES ·With TOP3 insulated packag TPDV1240RG Datasheet
Recommendation Recommendation Datasheet TPDV1240RG Datasheet





TPDV1240RG
isc Triacs
TPDV1240RG
FEATURES
·With TOP3 insulated package
·Be suitable for general purpose where high surge current capability is required.
Application such as phase control and tatic switching on inductive or resistive load.
·Minimum Lot-to-Lot variations for robust device performance and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak reverse voltage
IT(RMS) RMS on-state current (full sine wave)Tc=75
ITSM Non-repetitive peak on-state current tp=10ms
Tj
Operating junction temperature
Tstg Storage temperature
PG(AV) Average gate power dissipation(Tj=125)
Rth(j-c) Thermal resistance, junction to case
Rth(j-a) Thermal resistance, junction to ambient
MIN
UNIT
1200
V
1200
V
40
A
350
A
-40~125
-40~150
1
W
1.2 /W
50
/W
ELECTRICAL CHARACTERISTICS (TC=25unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
Repetitive peak reverse current
VR=VRRM,
VR=VRRM, Tj=125
IDRM
Repetitive peak off-state current
VD=VDRM,
VD=VDRM, Tj=125
IGT
Gate trigger current
VD=12V; RL= 33Ω
IH
Holding current
IGT= 0.5A, Gate Open
VGT Gate trigger voltage all quadrant VD=12V; RL= 33Ω
VTM On-state voltage
ITM= 35A; tp= 380μs
MAX
0.02
8
0.02
8
200
UNIT
mA
mA
200 mA
200
50 mA
1.5
V
1.8
V
isc websitewww.iscsemi.com
1 isc & iscsemi is registered trademark



TPDV1240RG
isc Triacs
TPDV1240RG
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not
designed for use in equipment which require specialized quality and/or reliability, or in equipment
which could have applications in hazardous environments, aerospace industry, or medical
field. Please contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
2 isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)