PNP Transistor. 2SA2222 Datasheet

2SA2222 Transistor. Datasheet pdf. Equivalent

Part 2SA2222
Description TO-263 PNP Transistor
Feature isc Silicon PNP Power Transistor INCHANGE Semiconductor 2SA2222 DESCRIPTION ·Large current capacit.
Manufacture INCHANGE
Datasheet
Download 2SA2222 Datasheet

Ordering number : ENA1148 www.DataSheet4U.com 2SA2222 SANY 2SA2222 Datasheet
isc Silicon PNP Power Transistor INCHANGE Semiconductor 2SA 2SA2222 Datasheet
isc Silicon PNP Power Transistor INCHANGE Semiconductor 2SA 2SA2222 Datasheet
isc Silicon PNP Power Transistor DESCRIPTION ·Large current 2SA2222SG Datasheet
Ordering number : ENA1799 2SA2222SG SANYO Semiconductors D 2SA2222SG Datasheet
Ordering number : ENA1799B 2SA2222SG Bipolar Transistor –50 2SA2222SG Datasheet
Recommendation Recommendation Datasheet 2SA2222 Datasheet




2SA2222
isc Silicon PNP Power Transistor
INCHANGE Semiconductor
2SA2222
DESCRIPTION
·Large current capacitance
·High speed switching
·Low saturation voltage
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
APPLICATIONS
·Relay drivers,lamp drivers,motor drivers
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
VALUE
UNIT
VCBO
Collector-Base Voltage
-50
V
VCEO
Collector-Emitter Voltage
-50
V
VEBO
Emitter-Base Voltage
-6
V
IC
Collector Current-Continuous
-10
A
ICM
Collector Current-Peak
Collector Power Dissipation
PC
@ TC=25
Collector Power Dissipation
@Ta=25
TJ
Junction Temperature
-13
A
40
W
2
150
Tstg
Storage Temperature Range
-55~150
isc websitewww.iscsemi.com
1 isc & iscsemi is registered trademark



2SA2222
isc Silicon PNP Power Transistor
INCHANGE Semiconductor
2SA2222
ELECTRICAL CHARACTERISTICS
TC=25unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
VCE(sat) Collector-Emitter Saturation Voltage IC= -6A; IB= -300mA
VBE(sat) Base-Emitter Saturation Voltage
IC= -6A; IB= -300mA
V(BR)CEO Collector-Emitter Breakdown Voltage IC= -1mA; IB= 0
V(BR)EBO Emitter-Base Breakdown Voltage
IE= -100uA; IC= 0
ICBO
Collector Cutoff Current
VCB= -40V; IE= 0
IEBO
Emitter Cutoff Current
VEB= -4V; IC= 0
hFE
DC Current Gain
IC= -0.27A; VCE= -2V
MIN TYP. MAX UNIT
-0.5
V
-1.2
V
-50
V
-6
V
-10
μA
-10
μA
150
450
NOTICE
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not
designed for use in equipment which require specialized quality and/or reliability, or in equipment
which could have applications in hazardous environments, aerospace industry, or medical
field. Please contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
2 isc & iscsemi is registered trademark





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)