OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN54HCT374, SN74HCT374
SCLS005E – MARCH 1984 – REVISED FEBRUARY 2022
SNx4HCT374 Octal Edge-Triggered D-Type Flip-Flops W...
Description
SN54HCT374, SN74HCT374
SCLS005E – MARCH 1984 – REVISED FEBRUARY 2022
SNx4HCT374 Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs
1 Features
Operating voltage range of 4.5 V to 5.5 V High-current 3-state true outputs can drive up to
15 LSTTL loads Low power consumption, 80-μA max ICC Typical tpd = 22 ns ±6-mA output drive at 5 V Low input current of 1 μA max Inputs are TTL-voltage compatible Eight D-type flip-flops in a single package Full parallel access for loading
2 Description
These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight flip-flops of the ’HCT374 devices are edgetriggered D-type flip-flops. On the positive transition ofthe clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs.
An output-enable (OE) input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
PART NUMBER SN74HCT374DW SN74HCT374DB SN74HCT374N SN74HCT374NS SN74HCT374PW SN54HCT374J SNJ54HCT374FK
Device Information
PACKAGE(1) BODY SIZE ...
Similar Datasheet