OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN54HCT574, SN74HCT574
SCLS177G – MARCH 1984 – REVISED JULY 2022
SNx4HCT574 Octal Edge-Triggered D-Type Flip-Flips With ...
Description
SN54HCT574, SN74HCT574
SCLS177G – MARCH 1984 – REVISED JULY 2022
SNx4HCT574 Octal Edge-Triggered D-Type Flip-Flips With 3-State Outputs
1 Features
Operating voltage range of 4.5 V to 5.5 V High-current 3-state noninverting outputs drive bus
lines directly or up to 15 LSTTL loads Low power consumption, 80-μA max ICC Typical tpd = 22 ns ±6-mA output drive at 5 V Low input current of 1 μA max Inputs are TTL-voltage compatible Bus-structured pinout
2 Description
These octal edge-triggered D-type flip-flops feature 3-state outputs designed specifically for bus driving. The ’HCT574 devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
PART NUMBER
Device Information
PACKAGE(1) BODY SIZE (NOM)
SN74HCT574DW SOIC (20)
12.80 mm × 7.50 mm
SN74HCT574DBR SSOP (20)
7.20 mm × 5.30 mm
SN74HCT574N
PDIP (20)
25.40 mm × 6.35 mm
SN74HCT574NSR SO (20)
15.00 mm × 5.30 mm
SN74HCT574PW TSSOP (20) 6.50 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at the end of the data sheet.
Logic Diagram (Positive Logic)
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
SN54HCT574, SN74HCT574
SCLS177G – MARCH 1984 – REVISED JULY 2022
www.ti.com
Table of Contents
1 Features....................................................
Similar Datasheet