Automotive 120-V Half-Bridge Driver
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
UCC27282-Q1
SLUSDN5A – SEPTEMBER ...
Description
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
UCC27282-Q1
SLUSDN5A – SEPTEMBER 2019 – REVISED JUNE 2020
UCC27282-Q1 Automotive 120-V Half-Bridge Driver with Cross Conduction Protection and Low Switching Losses
1 Features
1 AEC-Q100 qualified with following results – Temperature grade 1 (Tj = –40°C to 150°C) – HBM ESD classification level 1B – CDM ESD classification level C3
Drives two N-channel MOSFETs in high-side lowside configuration
5-V typical under voltage lockout Input interlock Enable/disable functionality in DRC package 16-ns typical propagation delay 12-ns rise, 10-ns fall time with 1.8-nF load 1-ns typical delay matching Absolute Maximum Negative Voltage Handling on
Inputs (–5 V) Absolute Maximum Negative Voltage Handling on
HS (–14 V) 3.5-A sink, 2.5-A Source output currents Absolute maximum boot voltage 120 V Low current (7-µA) consumption when disabled Integrated bootstrap diode
2 Applications
Automotive DC/DC converters Electric power steering On-board charger (OBC) Integrated belt starter generator (iBSG) Automotive HVAC compressor modules
Simplified Application Diagram
3 Description
The UCC27282-Q1 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3.5-A peak sink current and 2.5-A peak source current along with low p...
Similar Datasheet