Low Distortion Differential RF/IF Amplifier
Enhanced Product
Low Distortion Differential RF/IF Amplifier AD8351-EP
FEATURES
−3 dB bandwidth of 2.2 GHz for AV = 12...
Description
Enhanced Product
Low Distortion Differential RF/IF Amplifier AD8351-EP
FEATURES
−3 dB bandwidth of 2.2 GHz for AV = 12 dB Single-resistor programmable gain: 0 dB ≤ AV ≤ 26 dB Differential interface Low noise input stage: 2.70 nV/√Hz at 70 MHz, AV = 10 dB Low harmonic distortion
−79 dBc second at 70 MHz −81 dBc third at 70 MHz Output third-order intercept (OIP3) of 31 dBm at 70 MHz Single-supply operation: 3 V to 5.5 V Low power dissipation: 28 mA at 5 V Adjustable output common-mode voltage Fast settling and overdrive recovery Slew rate of 13,000 V/µs Power-down capability
ENHANCED PRODUCT FEATURES
Supports defense and aerospace applications (AQEC standard) Extended industrial temperature range: −55°C to +105°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Product change notification Qualification data available upon request
APPLICATIONS
Differential ADC drivers Single-ended-to-differential conversion IF sampling receivers RF/IF gain blocks Surface acoustic wave (SAW) filter interfacing
FUNCTIONAL BLOCK DIAGRAM
AD8351-EP
PWUP
BIAS CELL
VOCM VPOS
RGP1
14821-001
INHI INLO RGP2
Figure 1.
OPHI OPLO COMM
GENERAL DESCRIPTION
The AD8351-EP is a low cost differential amplifier useful in RF and IF applications up to 2.2 GHz. The voltage gain can be set from unity to 26 dB using a single external gain resistor. The AD8351-EP provides a nominal 150 Ω differential output impedance. The excellent distortion performance and low noise characteristics...
Similar Datasheet