Octal Buffers/Drivers
SN74AHC541ĆQ1 OCTAL BUFFER/DRIVER WITH 3ĆSTATE OUTPUTS
SCLS603A − DECEMBER 2004 − REVISED APRIL 2008
D Qualified for Au...
Description
SN74AHC541ĆQ1 OCTAL BUFFER/DRIVER WITH 3ĆSTATE OUTPUTS
SCLS603A − DECEMBER 2004 − REVISED APRIL 2008
D Qualified for Automotive Applications D Operating Range 2-V to 5.5-V VCC D Latch-Up Performance Exceeds 250 mA Per
JESD 17
description/ordering information
The SN74AHC541 octal buffer/driver is ideal for driving bus lines or buffer memory address registers. This device features inputs and outputs on opposite sides of the package to facilitate printed circuit board layout.
DW OR PW PACKAGE (TOP VIEW)
OE1 1 A1 2 A2 3 A3 4 A4 5 A5 6 A6 7 A7 8 A8 9
GND 10
20 VCC 19 OE2 18 Y1 17 Y2 16 Y3 15 Y4 14 Y5 13 Y6 12 Y7 11 Y8
The 3-state control gate is a two-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all corresponding outputs are in the high-impedance state. The outputs provide noninverted data when they are not in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION{
TA
PACKAGE‡
ORDERABLE PART NUMBER
TOP-SIDE MARKING
−40°C to 125°C
SOIC − DW TSSOP − PW
Tape and reel Tape and reel
SN74AHC541QDWRQ1 SN74AHC541QPWRQ1
AHC541Q AHC541Q
† For the most current package and ordering information, see the Package Option Addendum at the end of this
document, or see the TI web site at http://www.ti.com. ‡ Package drawings, t...
Similar Datasheet