DatasheetsPDF.com

ACT86600 Dataheets PDF



Part Number ACT86600
Manufacturers Qorvo
Logo Qorvo
Description Hybrid PMIC
Datasheet ACT86600 DatasheetACT86600 Datasheet (PDF)

BENEFITS and FEATURES  Wide operating voltage range  Vin = 2.7V to 14.4V  Withstand input voltage up to 16V  Vout = 0.6V to 5.26V  Complete Integrated Power Solution  Two 6A DC-DC buck converters  Two 4A DC-DC buck converters  One 0.5A DC-DC buck converter  One 0.6A DC-DC Buck-Boost converter  Integrated Power FETs  High efficiency  Up to 96% efficiency  Single stage 12V conversion  Low Quiescent current, <300uA  Excellent dynamic response  Programmable switching frequency  Smal.

  ACT86600   ACT86600



Document
BENEFITS and FEATURES  Wide operating voltage range  Vin = 2.7V to 14.4V  Withstand input voltage up to 16V  Vout = 0.6V to 5.26V  Complete Integrated Power Solution  Two 6A DC-DC buck converters  Two 4A DC-DC buck converters  One 0.5A DC-DC buck converter  One 0.6A DC-DC Buck-Boost converter  Integrated Power FETs  High efficiency  Up to 96% efficiency  Single stage 12V conversion  Low Quiescent current, <300uA  Excellent dynamic response  Programmable switching frequency  Small inductor sizes  Fast transient response  Proprietary COT control algorithm  High current, Multi-phase functionality  Single or multiphase phase outputs  8A and 12A multiphase outputs  Staggered phasing in 2-phase operation  Highly configurable  400KHz – 1.9MHz Frequency Range.  Near constant frequency operation.  Accepts wide inductor values and sizes.  Easy system level design  Configurable sequencing  Independent On & Off sequencing control.  Sequencing with external power supplies  Seven programmable GPIOs  I2C Interface with password protection.  Reset /Power Good Output  Flexible System Level Design  Versatile GPIO functions  Multiple Sleep modes  Soft / Hard Reset Functions  Watchdog Supervision  Interrupt function available.  I2C Safety bits to enhance immunity against spurious I2C transactions. ACT86600 Hybrid PMIC for Enterprise Storage and Computing  Fault protection  Input UV and OV Monitoring for each buck input.  Input and Output UV and OV Detection  Interrupt Controller and fault monitoring options.  Resistor-less Over Current Protection (OCP)  System voltage monitoring.  Small form factor 6X6mm FCOL QFN Package. APPLICATIONS  Solid-State Drives  Microcontroller Applications  FPGA  Personal Navigation Devices GENERAL DESCRIPTION The ACT86600 PMIC is an integrated ActivePMU power management unit. It is highly flexible and can be reconfigured via I2C for multiple applications without the need for PCB changes. The low external component count and high configurability significantly speeds time to market. Examples of configurable options include output voltage, startup time, slew rate, system level sequencing, switching frequency, sleep modes, operating modes etc. The core of the device includes 4 high power DC/DC step down converters, a lower power step down converter and a buck-boost converter. Each regulator can be configured for a wide range of output voltages through the I2C interface. The ACT86600 is a high voltage PMIC that is optimized for single stage voltage conversion from 12V input power sources. It operates with a 2.7V to 14.4V input voltage and can withstand 16V input voltage surges. The four high current regulators can be configured as single phase outputs, or can be paralleled for up to 12A dual phase with outputs. The ACT86600 PMIC is available in a 6 x 6 mm 48 pin QFN package. Data Sheet Rev. 1.0, November 22, 2019 Subject to change without notice 1 of 57 www.qorvo.com TYPICAL APPLICATION.


ACT85610 ACT86600 ACT8847


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)