FEATURES
INTEGRATED POWER SUPPLIES
Four DC/DC Step-Down (Buck) Regulators
2 x 1.8A, 2 x 1.3A
Five Low-Noise LDOs
...
FEATURES
INTEGRATED POWER SUPPLIES
Four DC/DC Step-Down (Buck)
Regulators
2 x 1.8A, 2 x 1.3A
Five Low-Noise LDOs
2 x 150mA, 3 x 350mA
Three Low-Input Voltage LDOs
1 x 150mA, 2 x 350mA
One Low IQ Keep-Alive LDO Backup Battery Charger
SYSTEM CONTROL AND INTERFACE
Six General Purpose I/O with PWM Drivers I2C Serial Interface Interrupt Controller
SYSTEM MANAGEMENT
Reset Interface and Sequencing Controller
Power on Reset Soft / Hard Reset Watchdog Supervision Multiple Sleep Modes
Thermal Management Subsystem
APPLICATIONS
Tablet PC Mobile Internet Devices (MID) Ebooks Personal Navigation Devices
ACT8840
Advanced PMU for Single-Core Application Processors
GENERAL DESCRIPTION
The ACT8840 is a complete, cost effective, and highly-efficient ActivePMUTM power management solution optimized for the power, voltage sequencing and control requirements of general Single-core application processor.
The ACT8840 features four fixed-frequency, currentmode, synchronous PWM step-down converters that achieve peak efficiencies of up to 97%. These
regulators operate with a fixed frequency of 2.25MHz, minimizing noise in sensitive applications and allowing the use of small external components. These buck
regulators supply up to 1.8A of output current and can fully satisfy the power and control requirements of the single-core application processor. Dynamic Voltage Scaling (DVS) is supported either by dedicated control pins, or through I2C interface to optimize ...