Hex buffer/line driver
74HC367; 74HCT367
Hex buffer/line driver; 3-state
Rev. 4 — 24 February 2021
Product data sheet
1. General description
...
Description
74HC367; 74HCT367
Hex buffer/line driver; 3-state
Rev. 4 — 24 February 2021
Product data sheet
1. General description
The 74HC367; 74HCT367 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. It enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
Wide supply voltage range from 2.0 V to 6.0 V CMOS low power dissipation High noise immunity Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Complies with JEDEC standards:
JESD8C (2.7 V to 3.6 V) JESD7A (2.0 V to 6.0 V) 3-state outputs Input levels: For 74HC367: CMOS level For 74HCT367: TTL level ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from -40 °C to +85 °C and -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information Type number Package
Temperature range
74HC367D
-40 °C to +125 °C
74HCT367D
74HC367PW -40 °C to +125 °C
74HCT367PW
Name SO16
TSSOP16
Description
Version
plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
Nexperia
4. Functional diagram
74HC367; 74HCT367
Hex buffer/line driver; 3-state
1A 2
2A 4
3A 6
4A 10
1OE 1
5A 12
6A 14
2OE 15
Fig. 1. Logic symbol
1OE
2OE
1Y 3
2Y 5
3Y 7
4Y 9
5Y 11
6Y 13
...
Similar Datasheet