Quad single-pole single-throw analog switch
74HC4066; 74HCT4066
Quad single-pole single-throw analog switch
Rev. 10 — 8 June 2021
Product data sheet
1. General ...
Description
74HC4066; 74HCT4066
Quad single-pole single-throw analog switch
Rev. 10 — 8 June 2021
Product data sheet
1. General description
The 74HC4066; 74HCT4066 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
Input levels nE inputs: For 74HC4066: CMOS level For 74HCT4066: TTL level
Low ON resistance: 50 Ω (typical) at VCC = 4.5 V 45 Ω (typical) at VCC = 6.0 V 35 Ω (typical) at VCC = 9.0 V
Specified in compliance with JEDEC standard no. 7A ESD protection:
HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Multiple package options Specified from -40 °C to +85 °C and -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
Description
Version
74HC4066D 74HCT4066D
-40 °C to +125 °C SO14
plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
74HC4066PW 74HCT4066PW
-40 °C to +125 °C
TSSOP14 plastic thin shrink small outline package; 14 leads; SOT402-1 body width 4.4 mm
74HC4066BQ 74HCT4066BQ
-40 °C to +125 °C
DHVQFN14 plastic dual in-line compatible thermal enhanced SOT762-1 very thin quad flat package; no leads; 14 terminals; body 2.5 × 3 × 0.85 mm
Nexperia
4....
Similar Datasheet