Quad single-pole single-throw analog switch
74HC4316; 74HCT4316
Quad single-pole single-throw analog switch
Rev. 5 — 10 March 2021
Product data sheet
1. General...
Description
74HC4316; 74HCT4316
Quad single-pole single-throw analog switch
Rev. 5 — 10 March 2021
Product data sheet
1. General description
The 74HC4316; 74HCT4316 is a quad single pole, single throw analog switch (SPST). Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nS). When nS is LOW, the analog switch is turned off. When E is HIGH all four analog switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
Input levels E and nS inputs: For 74HC4316: CMOS level For 74HCT4316: TTL level
Low ON resistance: 160 Ω (typical) at VCC - VEE = 4.5 V 120 Ω (typical) at VCC - VEE = 6.0 V 80 Ω (typical) at VCC - VEE = 9.0 V
Logic level translation: To enable 5 V logic to communicate with ±5 V analog signals
Typical break-before-make built in Specified in compliance with JEDEC standard no. 7A ESD protection:
HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Multiple package options Specified from -40 °C to +85 °C and -40 °C to +125 °C
3. Applications
Signal gating Modulation Demodulation Chopper
Nexperia
74HC4316; 74HCT4316
Quad single-pole single-throw analog switch
4. Ordering information
Table 1. Ordering information Type number Package
Temperature range Name
Description
Version
74HC4316D -40 °C to +125 °C SO16
plastic small outline package; 16 leads; body width 3.9...
Similar Datasheet