Octal bus transceiver
74LV245A
Octal bus transceiver; 3-state
Rev. 2 — 3 November 2016
Product data sheet
1. General description
The 74LV245...
Description
74LV245A
Octal bus transceiver; 3-state
Rev. 2 — 3 November 2016
Product data sheet
1. General description
The 74LV245A is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state.
Inputs are overvoltage tolerant. This feature allows the use of these devices as translators in mixed voltage environments.
Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.
This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
2. Features and benefits
Wide supply voltage range from 2.0 V to 5.5 V Maximum tpd of 6.5 ns at 5 V Typical VOL(p) < 0.8 V at VCC = 3.3 V, Tamb = 25 C Typical VOH(v) > 2.3 V at VCC = 3.3 V, Tamb = 25 C Supports mixed-mode voltage operation on all ports IOFF circuitry provides partial Power-down mode operation Latch-up performance exceeds 250 mA per JESD 78 Class II ESD protection:
HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 3 kV MM JESD22-A115-A exceeds 200 V CDM JESD22-C101E exceeds 2 kV Specified from 40 C to +85 C and from 40 C to +125 C
Nexperia
74LV245A
Octal bus transceiver; 3-state
3. Ordering information
Table 1. Ordering information Type number Package
Temperature range 74LV245APW...
Similar Datasheet