Dual 4-bit binary ripple counter
74LV393
Dual 4-bit binary ripple counter
Rev. 6 — 19 March 2021
Product data sheet
1. General description
The 74LV393 ...
Description
74LV393
Dual 4-bit binary ripple counter
Rev. 6 — 19 March 2021
Product data sheet
1. General description
The 74LV393 is a dual 4-stage binary ripple counter. Each counter features a clock input (nCP), an overriding asynchronous master reset input (nMR) and 4 buffered parallel outputs (nQ0 to nQ3). The counter advances on the HIGH-to-LOW transition of nCP. A HIGH on nMR clears the counter stages and forces the outputs LOW, independent of the state of nCP. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess VCC.
2. Features and benefits
Optimized for low voltage applications: 1.0 V to 3.6 V Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V Typical VOLP (output ground bounce) 0.8 V at VCC = 3.3 V, Tamb = 25 °C Typical VOHV (output VOH undershoot) 2 V at VCC = 3.3 V, Tamb = 25 °C Two 4-bit binary counters with individual clocks Divide-by any binary module up to 28 in one package Two master resets to clear each 4-bit counter individually Complies with JEDEC standard no. 7A ESD protection:
HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V
3. Ordering information
Table 1. Ordering information Type number Package
Temperature range 74LV393D -40 °C to +125 °C 74LV393PW -40 °C to +125 °C
Name SO14 TSSOP14
Description
Version
plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
plastic thin shrink small outline package; 14 leads; body width 4.4 mm
...
Similar Datasheet