74LV4052D

74LV4052 Dual 4-channel analog multiplexer/demultiplexer Rev. 6 — 24 September 2021 Product data sheet 1. General description The 74LV4052 is a dual single-pole quad-throw analog switch suitable for use in 4:1 multiplexer/ demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0, S1) are common to both switches. When E is HIGH, the switches are turned off. Digital inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess VCC. 2. Features and benefits Wide supply voltage range from 1.0 to 6.0 V CMOS low power dissipation Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Optimized for low-voltage applications: 1.0 V to 6.0 V Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V Low ON resistance: 145 Ω (typical) at VCC - VEE = 2.0 V 90 Ω (typical) at VCC - VEE = 3.0 V 60 Ω (typical) at VCC - VEE = 4.5 V Logic level translation: To enable 3 V logic to communicate with ± 3 V analog signals Typical ‘break before make’ built in Complies with JEDEC standards: JESD8-7 (1.65 V to 1.95 V) JESD8-5 (2.3 V to 2.7 V) JESD8C (2.7 V to 3.6 V) JESD36 (4.5 V to 5.5 V) ESD protection: HBM JESD22-A114E exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from -40 °C to +85 °C and from -40 °C to +125 °C 3. Ordering informat...