Quad bilateral switches
74LV4066
Quad bilateral switches
Rev. 5 — 24 October 2022
Product data sheet
1. General description
The 74LV4066 is a ...
Description
74LV4066
Quad bilateral switches
Rev. 5 — 24 October 2022
Product data sheet
1. General description
The 74LV4066 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Digital inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess VCC.
2. Features and benefits
Wide supply voltage range from 1.0 to 6.0 V CMOS low power dissipation Direct interface with TTL levels Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Complies with JEDEC standards:
JESD8-7 (1.65 V to 1.95 V) JESD8-5 (2.3 V to 2.7 V) JESD8C (2.7 V to 3.6 V) JESD36 (4.5 V to 5.5 V) Typical VOLP (output ground bounce): < 0.8 V at VCC = 3.3 V and Tamb = 25 °C Very low ON-resistance: 60 Ω (typical) at VCC = 2.0 V 35 Ω (typical) at VCC = 3.0 V 25 Ω (typical) at VCC = 4.5 V ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from -40 °C to +80 °C and from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information Type number Package
Temperature range Name 74LV4066D -40 °C to +125 °C SO14
74LV4066DB -40 °C to +125 °C SSOP14
74LV4066PW -40 °C to +125 °C TSSOP14
Description
plastic small outline package; 14 leads; body width 3.9 mm
plastic shrink small outline package; 14 leads; body width 5.3 mm
plastic thin shrin...
Similar Datasheet