Programmable Clock Generator
Programmable Clock Generator
5P49V6914
DATASHEET
Description
Features
The 5P49V6914 is a programmable clock generat...
Description
Programmable Clock Generator
5P49V6914
DATASHEET
Description
Features
The 5P49V6914 is a programmable clock generator intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is IDTs fifth generation of programmable clock technology (VersaClock® 6).
The frequencies are generated from a single reference clock. The reference clock can come from one of the two redundant clock inputs. A glitchless manual switchover function allows one of the redundant clocks to be selected during normal operation.
Two select pins allow up to 4 different configurations to be programmed and accessible using processor GPIOs or bootstrapping. The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe) or system production margin testing.
The device may be configured to use one of two I2C addresses to allow multiple devices to be used in a system.
Pin Assignment
OUT0_SEL_I2CB VDDO0 VDDD VDDO1 OUT1 OUT1B
CLKIN CLKINB
XOUT XIN/REF
VDDA CLKSEL
1 24 23
22
21
20
19 18
2
17
3
EPAD
16
4
GND
15
5
14
6
13
7 8 9 10 11 12
VDDO2 OUT2 OUT2B VDDO3 OUT3 OUT3B
SD/OE SEL1/SDA SEL0/SCL
VDDA NC NC
24-pin VFQFPN
Generates up to three independent output frequencies
High performance, low phase noise PLL, <0.5 ps RMS
typical ph...
Similar Datasheet