Digital Step Attenuator
F1956 Datasheet
7-Bit 0.25dB Wideband Digital Step Attenuator
1 to 6000 MHz
DESCRIPTION
This document describes the s...
Description
F1956 Datasheet
7-Bit 0.25dB Wideband Digital Step Attenuator
1 to 6000 MHz
DESCRIPTION
This document describes the specification for the F1956 Digital Step Attenuator. The F1956 is part of Renesas’ Glitch-FreeTM family of DSAs optimized for the demanding requirements of Base Station (BTS) radio cards and numerous other non-BTS applications. This device is offered in compact 5 × 5 mm 32-pin package with 50Ω input and output impedance for ease of integration into the radio or RF system.
COMPETITIVE ADVANTAGE
The F1956 offers very high reliability due to its construction from a monolithic silicon die in a QFN package. The insertion loss is very low with minimal distortion. Additionally, the device is designed to have extremely accurate attenuations levels. These accurate attenuation level improves system SNR and/or ACLR by ensuring system gain is as close to targeted level as possible. Also, the very fast settling time in parallel mode is ideal for fast switching systems. Finally, the device is Glitch-FreeTM with less than 2dB of ringing across the attenuation range in stark contrast to competing DSAs that glitch as much as 10dB during MSB state changes.
FEATURES
Serial and 7-bit Parallel Interface 31.75dB Range 0.25dB steps Glitch-FreeTM: low transient overshoot 500ns settling time Ultra linear > 64dBm IIP3 Low Insertion Loss < 1.7dB at 4GHz Attenuation error < ±0.2dB at 4GHz Bi-directional RF use 3.3V or 5V Supply 1.8V or 3.3V control logic Low Cur...
Similar Datasheet