74HC164T14-13

NEW PRNOEDWUCPTRODUCT 74HC164 8-BIT PARALLEL-OUT SERIAL SHIFT RE4G0I0STERS Description The 74HC164 is a serial input 8-bit edge-triggered shift register that has outputs from each of eight stages. SERIAL DATA INPUT PINS The serial input data is entered at pin SDA or pin SDB as these are logically ANDED. Either input could be used as an active HIGH enable with data entry on the other pin. If a single input is desired, the pins can be tied together or the unused input can be tied HIGH. DATA ENTRY Data is shifted into Q0 from the serial input pins on each LOW to HIGH transition of the CP pin. Also during the CP edge the data is transferred from each Qn to Qn+1. The serial data on pins DSA and DSB must be stable before and after the CP rising edge to meet the set-up and hold timing requirements. Pin Assignments ( Top View ) DSA 1 DSB 2 Q0 3 Q1 4 Q2 5 Q3 6 GND 7 14 Vcc 13 Q7 12 Q6 11 Q5 10 Q4 9 MR 8 CP SO-14 / TSSOP-14 / PDIP-14 RESET When asserted LOW the Master Reset ( MR ) pin sets all Qn to LOW. This action does not depend on the condition of serial input or clock pins. The MR must be asserted HIGH for a recovery time before the next CP positive edge pulse. Features  Wide Supply Voltage Range from 2.0V to 6.0V  Sinks or Sources 4mA at VCC = 4.5V  CMOS Low Power Consumption  Schmitt Trigger Action at all Inputs  ESD Protection Exceeds JESD 22  200-V Machine Model (A115)  2000-V Human Body Model (A114)  Exceeds 1000-V Charged Device Model (C101)  R...