SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
NEW PRODUCT
AP22804 / AP22814
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
Description
The AP22804/AP22814 is a singl...
Description
NEW PRODUCT
AP22804 / AP22814
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
Description
The AP22804/AP22814 is a single channel current-limited integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of Enable input.
The device has fast short-circuit response time for improved overall system robustness, and has an integrated output discharge function to ensure completely controlled discharging of the output voltage capacitor. They provide a complete protection solution for applications subject to heavy capacitive loads and the prospect of short circuit, and offer reverse current blocking, over-current, over-temperature and short-circuit protection, as well as controlled rise time and under-voltage lockout functionality. A 6ms deglitch capability on the open-drain Flag output prevents false over-current reporting and does not require any external components.
Pin Assignments
(Top View)
GND 1 IN 2 IN 3 EN 4
MSOP-8 (Top View)
8 NC 7 OUT 6 OUT 5 FLG
The AP22804/AP22814 is available in a standard Green SOT25, MSOP-8 and U-DFN2020-6 packages with exposed PAD for improve thermal performance and is RoHS compliant.
Features
Input Voltage Range: 2.7V to 5.5V 50mΩ On-resistance Built-in Soft-start with 0.6ms Typical Rise Time Fault Report (FLG) with Blanking Time (6ms Typ) ESD Protection: 2kV HBM, 200V MM Active Low (B) or Active ...
Similar Datasheet