IEEE P1394a PHY
Geode™ CS4103 IEEE P1394a Physical Layer Device
July 2000
Geode™ CS4103 IEEE P1394a Physical Layer Device
General Des...
Description
Geode™ CS4103 IEEE P1394a Physical Layer Device
July 2000
Geode™ CS4103 IEEE P1394a Physical Layer Device
General Description
The National Semiconductor® Geode™ CS4103 is a three crystal or a 24.576 MHz clock input. The CS4103 operates
port 400 Mbit/sec IEEE 1394 Physical Layer (PHY) device. from a single 3.3V supply and supports transfers at 98.304,
The CS4103 complies to revision 2.0 of the P1394a specifi- 196.608, and 393.216 Mbit/sec, (usually referred to as 100,
cation. The device is a three port implementation of a reusable cell design scalable from one to sixteen ports.
The CS4103 supports all of the P1394a enhancements including connection debounce, arbitrated reset, ack-accelerated arbitration, fly-by concatenation, multi-speed packet concatenation, PHY pinging, priority arbitration, and Suspend/Resume operation. It also implements the standard
te PHY-Link interface defined in IEEE specification 1394-1995
and updated in the P1394a specification for direct connection with the Geode CS4210 IEEE 1394 Open Host Controller Interface (OHCI) device. The interface can operate in either direct or isolated mode and supports single capacitor isolation with bus hold inputs.
le The CS4103 provides a complete PHY solution including
all bias generation, differential line drivers and receivers, single ended comparators for speed signaling, speed signaling current sources, bias detect, and connect detect circuitry per port. It includes data and strobe encoding/ decoding functi...
Similar Datasheet