Document
Slot-type Photomicrosensor (Non-modulated) *1
EE-SX47/67
CSM_EE-SX47/67_DS_E_13_2
Global Standard Slot-type photomicrosensors with 50- to 100-mA direct switching capacity.
• Series includes models that enable switching between dark-ON and light-ON operation.
• Response frequency as high as 1 kHz. • Easy operation monitoring with bright light indicator. • Wide operating voltage range: 5 to 24 VDC • Models in which the light indicator turns ON for dark-ON
operation are also available. • A wide range of variations in eight different shapes. • Flexible robot cable is provided as a standard feature. *2
Be sure to read Safety Precautions on page 5.
*1. Pre-wired Models are available only in the EE-SX67 Series. *2. Only for Pre-wired Models.
For the most recent information on models that have been certified for safety standards, refer to your OMRON website.
Ordering Information
Connector
Appearance Standard
L-shaped
T-shaped, slot center 7 mm Closemounting Closemounting T-shaped, slot center 10 mm
Sensing method
Connecting method
Sensing distance
Output configuration
Indicator mode
Dark-ON/Light-ON Incident light (selectable) *3 *4 No incident light
Light-ON
Incident light
Dark-ON/Light-ON Incident light (selectable) *3 *4 No incident light
Light-ON
Incident light
Dark-ON/Light-ON Incident light (selectable) *3 *4 No incident light
Light-ON
Incident light
Throughbeam type
(with slot)
Connector (4 poles)
Dark-ON/Light-ON Incident light (selectable) *3 *4 No incident light
5 mm Light-ON
Incident light
(slot width) Dark-ON/Light-ON Incident light
(selectable) *3 *4 No incident light
Light-ON
Incident light
Infrared light
Model NPN output PNP output
EE-SX670
EE-SX670P
EE-SX670A EE-SX670R
EE-SX470
---
EE-SX671
EE-SX671P
EE-SX671A EE-SX671R
EE-SX471
---
EE-SX672
EE-SX672P
EE-SX672A EE-SX672R
EE-SX472
---
EE-SX673
EE-SX673P
EE-SX673A EE-SX673R
EE-SX473
---
EE-SX674
EE-SX674P
EE-SX674A EE-SX674R
EE-SX474
---
Dark-ON/Light-ON (selectable) *3 *4
Incident light
EE-SX675
EE-SX675P
F-shaped
Dark-ON/Light-ON (selectable) *3 *4
Incident light
EE-SX676
EE-SX676P
R-shaped
Dark-ON/Light-ON (selectable) *3 *4
Incident light
EE-SX677
EE-SX677P
*3. Dark-ON when the L terminal of the connector is opened, and light-ON when the L terminal and positive (+) terminal are connected. Do not connect the L terminal to 0 V when using dark-ON operation. When using light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are connected in advance.
*4. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from coming in contact with other terminals.
1
EE-SX47/67
Pre-wired Models
Appearance Standard
Sensing method
Sensing distance
Output configura-
tion
Indicator mode
Connecting method
Model
Infrared light
NPN output
PNP output
EE-SX670-WR 1M
EE-SX670P-WR 1M
L-shaped
EE-SX671-WR 1M
EE-SX671P-WR 1M
T-shaped, slot center 7 mm
EE-SX672-WR 1M
EE-SX672P-WR 1M
Closemounting Closemounting
Throughbeam type
(with slot)
Dark-ON/ 5 mm Light-ON (slot width) (selectable)
*1 *2
Incident light
Pre-wired Models (1m)
EE-SX673-WR 1M
EE-SX673P-WR 1M
EE-SX674-WR 1M
EE-SX674P-WR 1M
T-shaped, slot center 10 mm
EE-SX675-WR 1M
EE-SX675P-WR 1M
F-shaped
EE-SX676-WR 1M
EE-SX676P-WR 1M
R-shaped
EE-SX677-WR 1M
EE-SX677P-WR 1M
*1. Dark-ON operation can be used when the L terminal is left unconnected or Light-ON operation can be used when the L terminal and positive (+) terminal are connected to each other. Do not connect the L terminal to 0 V when using dark-ON operation.
*2. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from coming in contact with other terminals.
Accessories (Order Separately) Connector Models
Type
Cable length
Model
Remarks
Connector
EE-1001
EE-1001-1
L terminal and positive (+) terminal are already short-circuited.
EE-1009 *
1m Connector with Cable
2m
EE-1006 1M EE-1010 1M * EE-1006 2M EE-1010 2M *
Connector with Robot
1m
Cable
2m
EE-1010-R 1M * EE-1010-R 2M *
Connector Hold-down Clip
EE-1006A
Applicable Photomicrosensors For EE-SX670@ and 470@ only. (Can be used only with EE-1006 Connectors for the Photomicrosensors listed above.)
Note: For details, refer to the Photomicro Sensors Accessories on EE-@ which can be accessed from your OMRON website. * EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable di.