Document
Slot-type Photomicrosensor (Non-modulated) *1
EE-SX47/67
CSM_EE-SX47/67_DS_E_13_2
Global Standard Slot-type photomicrosensors with 50- to 100-mA direct switching capacity.
• Series includes models that enable switching between dark-ON and light-ON operation.
• Response frequency as high as 1 kHz. • Easy operation monitoring with bright light indicator. • Wide operating voltage range: 5 to 24 VDC • Models in which the light indicator turns ON for dark-ON
operation are also available. • A wide range of variations in eight different shapes. • Flexible robot cable is provided as a standard feature. *2
Be sure to read Safety Precautions on page 5.
*1. Pre-wired Models are available only in the EE-SX67 Series. *2. Only for Pre-wired Models.
For the most recent information on models that have been certified for safety standards, refer to your OMRON website.
Ordering Information
Connector
Appearance Standard
L-shaped
T-shaped, slot center 7 mm Closemounting Closemounting T-shaped, slot center 10 mm
Sensing method
Connecting method
Sensing distance
Output configuration
Indicator mode
Dark-ON/Light-ON Incident light (selectable) *3 *4 No incident light
Light-ON
Incident light
Dark-ON/Light-ON Incident light (selectable) *3 *4 No incident light
Light-ON
Incident light
Dark-ON/Light-ON Incident light (selectable) *3 *4 No incident light
Light-ON
Incident light
Throughbeam type
(with slot)
Connector (4 poles)
Dark-ON/Light-ON Incident light (selectable) *3 *4 No incident light
5 mm Light-ON
Incident light
(slot width) Dark-ON/Light-ON Incident light
(selectable) *3 *4 No incident light
Light-ON
Incident light
Infrared light
Model NPN output PNP output
EE-SX670
EE-SX670P
EE-SX670A EE-SX670R
EE-SX470
---
EE-SX671
EE-SX671P
EE-SX671A EE-SX671R
EE-SX471
---
EE-SX672
EE-SX672P
EE-SX672A EE-SX672R
EE-SX472
---
EE-SX673
EE-SX673P
EE-SX673A EE-SX673R
EE-SX473
---
EE-SX674
EE-SX674P
EE-SX674A EE-SX674R
EE-SX474
---
Dark-ON/Light-ON (selectable) *3 *4
Incident light
EE-SX675
EE-SX675P
F-shaped
Dark-ON/Light-ON (selectable) *3 *4
Incident light
EE-SX676
EE-SX676P
R-shaped
Dark-ON/Light-ON (selectable) *3 *4
Incident light
EE-SX677
EE-SX677P
*3. Dark-ON when the L terminal of the connector is opened, and light-ON when the L terminal and positive (+) terminal are connected. Do not connect the L terminal to 0 V when using dark-ON operation. When using light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are connected in advance.
*4. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from coming in contact with other terminals.
1
EE-SX47/67
Pre-wired Models
Appearance Standard
S.