Photomicrosensor. EE-SX675P Datasheet

EE-SX675P Photomicrosensor. Datasheet pdf. Equivalent


OMRON EE-SX675P
Slot-type Photomicrosensor (Non-modulated) *1
EE-SX47/67
CSM_EE-SX47/67_DS_E_13_2
Global Standard Slot-type
photomicrosensors with 50- to
100-mA direct switching capacity.
• Series includes models that enable switching between
dark-ON and light-ON operation.
• Response frequency as high as 1 kHz.
• Easy operation monitoring with bright light indicator.
• Wide operating voltage range: 5 to 24 VDC
• Models in which the light indicator turns ON for dark-ON
operation are also available.
• A wide range of variations in eight different shapes.
• Flexible robot cable is provided as a standard feature. *2
Be sure to read Safety Precautions on
page 5.
*1. Pre-wired Models are available only in the EE-SX67 Series.
*2. Only for Pre-wired Models.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Ordering Information
Connector
Appearance
Standard
L-shaped
T-shaped,
slot center
7 mm
Close-
mounting
Close-
mounting
T-shaped,
slot center
10 mm
Sensing
method
Connect-
ing method
Sensing distance
Output
configuration
Indicator mode
Dark-ON/Light-ON Incident light
(selectable) *3 *4 No incident light
Light-ON
Incident light
Dark-ON/Light-ON Incident light
(selectable) *3 *4 No incident light
Light-ON
Incident light
Dark-ON/Light-ON Incident light
(selectable) *3 *4 No incident light
Light-ON
Incident light
Through-
beam
type
(with slot)
Connector
(4 poles)
Dark-ON/Light-ON Incident light
(selectable) *3 *4 No incident light
5 mm Light-ON
Incident light
(slot width)
Dark-ON/Light-ON Incident light
(selectable) *3 *4 No incident light
Light-ON
Incident light
Infrared light
Model
NPN output PNP output
EE-SX670
EE-SX670P
EE-SX670A EE-SX670R
EE-SX470
---
EE-SX671
EE-SX671P
EE-SX671A EE-SX671R
EE-SX471
---
EE-SX672
EE-SX672P
EE-SX672A EE-SX672R
EE-SX472
---
EE-SX673
EE-SX673P
EE-SX673A EE-SX673R
EE-SX473
---
EE-SX674
EE-SX674P
EE-SX674A EE-SX674R
EE-SX474
---
Dark-ON/Light-ON
(selectable) *3 *4
Incident light
EE-SX675
EE-SX675P
F-shaped
Dark-ON/Light-ON
(selectable) *3 *4
Incident light
EE-SX676
EE-SX676P
R-shaped
Dark-ON/Light-ON
(selectable) *3 *4
Incident light
EE-SX677
EE-SX677P
*3. Dark-ON when the L terminal of the connector is opened, and light-ON when the L terminal and positive (+) terminal are connected. Do not connect the L terminal
to 0 V when using dark-ON operation. When using light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector
are connected in advance.
*4. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the
Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from
coming in contact with other terminals.
1


EE-SX675P Datasheet
Recommendation EE-SX675P Datasheet
Part EE-SX675P
Description Photomicrosensor
Feature EE-SX675P; Slot-type Photomicrosensor (Non-modulated) *1 EE-SX47/67 CSM_EE-SX47/67_DS_E_13_2 Global Standard .
Manufacture OMRON
Datasheet
Download EE-SX675P Datasheet




OMRON EE-SX675P
EE-SX47/67
Pre-wired Models
Appearance
Standard
Sensing
method
Sensing distance
Output
configura-
tion
Indicator
mode
Connecting
method
Model
Infrared light
NPN output
PNP output
EE-SX670-WR 1M
EE-SX670P-WR
1M
L-shaped
EE-SX671-WR 1M
EE-SX671P-WR
1M
T-shaped,
slot center
7 mm
EE-SX672-WR 1M
EE-SX672P-WR
1M
Close-
mounting
Close-
mounting
Through-
beam
type
(with slot)
Dark-ON/
5 mm Light-ON
(slot width) (selectable)
*1 *2
Incident
light
Pre-wired
Models (1m)
EE-SX673-WR 1M
EE-SX673P-WR
1M
EE-SX674-WR 1M
EE-SX674P-WR
1M
T-shaped,
slot center
10 mm
EE-SX675-WR 1M
EE-SX675P-WR
1M
F-shaped
EE-SX676-WR 1M
EE-SX676P-WR
1M
R-shaped
EE-SX677-WR 1M
EE-SX677P-WR
1M
*1. Dark-ON operation can be used when the L terminal is left unconnected or Light-ON operation can be used when the L terminal and positive (+) terminal are
connected to each other. Do not connect the L terminal to 0 V when using dark-ON operation.
*2. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the
Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from
coming in contact with other terminals.
Accessories (Order Separately) Connector Models
Type
Cable
length
Model
Remarks
Connector
EE-1001
EE-1001-1
L terminal and positive (+) terminal are already short-circuited.
EE-1009 *
1m
Connector with Cable
2m
EE-1006 1M
EE-1010 1M *
EE-1006 2M
EE-1010 2M *
Connector with Robot
1m
Cable
2m
EE-1010-R 1M *
EE-1010-R 2M *
Connector Hold-down Clip
EE-1006A
Applicable Photomicrosensors
For EE-SX670@ and 470@ only.
(Can be used only with EE-1006 Connectors for the
Photomicrosensors listed above.)
Note: For details, refer to the Photomicro Sensors Accessories on EE-@ which can be accessed from your OMRON website.
* EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector
from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector
from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.
2



OMRON EE-SX675P
Ratings and Specifications
EE-SX47/67
Type Standard
L-shaped
NPN
models
Connector
models
Pre-wired
models
PNP
models
Item
Connector
models
Pre-wired
models
Sensing distance
EE-SX670
EE-SX670A
EE-SX470
EE-SX671
EE-SX671A
EE-SX471
EE-SX670-
WR
EE-SX671-
WR
EE-SX670P
EE-SX670R
EE-SX671P
EE-SX671R
EE-SX670P- EE-SX671P-
WR
WR
5 mm (slot width)
T-shaped,
slot center
7 mm
EE-SX672
EE-SX672A
EE-SX472
EE-SX672-
WR
EE-SX672P
EE-SX672R
EE-SX672P-
WR
Close-mounting
EE-SX673
EE-SX673A
EE-SX473
EE-SX673-
WR
EE-SX673P
EE-SX673R
EE-SX673P-
WR
EE-SX674
EE-SX674A
EE-SX474
EE-SX674-
WR
EE-SX674P
EE-SX674R
EE-SX674P-
WR
T-shaped,
slot center
10 mm
EE-SX675
EE-SX675-
WR
EE-SX675P
EE-SX675P-
WR
F-shaped
EE-SX676
EE-SX676-
WR
EE-SX676P
EE-SX676P-
WR
R-shaped
EE-SX677
EE-SX677-
WR
EE-SX677P
EE-SX677P-
WR
Sensing object
Differential distance
Light source
Opaque: 2 × 0.8 mm min.
0.025 mm
Infrared LED with a peak wavelength of 940 nm
Indicator *1
Supply voltage
Light indicator (red) (turns ON when light is interrupted for models with A or R suffix)
5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption
Control output
Protection circuits
Response frequency *2
12 mA max. (Connector models, L terminal open), 35 mA max. (NPN pre-wired models), 30 mA max. (PNP pre-wired models)
NPN open collector: 5 to 24 VDC, 100 mA max.
100 mA load current with a residual voltage of 0.8 V max.
40 mA load current with a residual voltage of 0.4 V max.
OFF current (leakage current): 0.5 mA max.
PNP open collector: 5 to 24 VDC, 50 mA max.
50 mA load current with a residual voltage of 1.3 V max.
OFF current (leakage current): 0.5 mA max.
Load short circuit protection (Connector models), No circuit protection (Pre-wired models)
1 kHz min. (3 kHz average)
Ambient illumination
Ambient temperature range
Ambient humidity range
Vibration resistance
Shock resistance
Degree of protection
Connecting method
Wei-
ght
Ma-
teri-
al
Connector models
Pre-wired models
Case
Cover
Emitter/receiver
1,000 lx max. with fluorescent light on the surface of the receiver.
Operating: 25 to +55°C, Storage: 30 to +80°C (with no icing or condensation)
Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation)
Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2)
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
IEC60529 IP50
Connector Models (direct soldering possible), Pre-wired Models (Standard cable length: 1 m),
Models with Connectors (Standard cable length: 0.1 m)
Approx. 3.1 g Approx. 3 g Approx. 2.4 g Approx. 2.3 g Approx. 3 g Approx. 2.7 g
Approx. 18.9 g Approx. 17.3 g Approx. 17.8 g Approx. 16.8 g Approx. 17.1 g Approx. 18.3 g
Polybutylene phthalate (PBT)
Approx. 2.2 g
Approx. 16.9 g
Polycarbonate
Approx. 2.2 g
Approx. 16.9 g
*1. The indicator is a GaP red LED (peak wavelength: 690 nm).
*2. The response frequency was measured by detecting the rotating disk shown at the right.
Disk
1 mm
2.1 mm
1 mm
t = 0.2 mm
3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)