USB 2.0 High Speed Signal Conditioner
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TUSB214
SLLSEX7A – AUGUST 2017 – ...
Description
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TUSB214
SLLSEX7A – AUGUST 2017 – REVISED SEPTEMBER 2017
TUSB214 USB 2.0 High Speed Signal Conditioner with BC1.2 CDP
1 Features
1 Compatible with USB 2.0, OTG 2.0 and BC 1.2 Pin strap or I2C configurable BC1.2 Charging Downstream Port (CDP)
controller Support for LS, FS, HS signaling Ultra-low USB Disconnect and Shutdown Power
Consumption Selectable Signal Gain Via Daisy Chain Device for
High Loss Applications D1P/M and D2P/M Interchangeable and
Host/Device Agnostic Supports up to 5m pre-channel or 2m post-
channel Cable Length – Four Selectable AC Boost Settings Via
External Pulldown Resistor – DC Boost Along With AC Boost for Best Signal
Integrity
2 Applications
Notebooks Desktops Docking Stations Tablets Cell Phones Active Cable, Cable Extenders Backplane Televisions
3 Description
The TUSB214 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel.
TUSB214 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB214 while HS signals are compensated.
Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.
In addition, TUSB214 is compatible with the USB OnThe-Go (OTG) ...
Similar Datasheet