IP101GA

IP101G Data Sheet Single Port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver (85nm/Extreme Low PW, PWMT® and EMIMT®) Features z 10/100Mbps IEEE 802.3/802.3u compliant Fast Ethernet transceiver z Supports 100Base-TX/FX Media Interface z Supports MII/ RMII Interface z Supports Auto MDI/MDIX function z Power Management Tool - APS, auto power saving while Link-off - 802.3az, protocol based power saving - WOL+, light traffic power saving - PWD, force-off power saving - Supports MII with LPI for RX and TX - Supports RMII with LPI for RX z Supports Base Line Wander compensation z Supports Interrupt function z Built in synchronization FIFO to support jumbo frame size up to 12KB in MII mode (10KB in RMII 100Mbps mode) z Supports MDC and MDIO to communicate with the MAC z EMI Management Tool - F/W based control - 4 levels for mapping the difference layout length on the PCB z Single 3.3V power supply z Built-in Vcore regulator z DSP-based PHY Transceiver technology z System Debug Assistant Tool - 16 bit RX counter - 9 bit RXError/CRC counter - Isolate MII/RMII - RX to TX Loopback - Loopback MII/RMII z Using either 25MHz crystal/oscillator or 50MHz oscillator REF_CLK as clock source z Built-in 49.9ohm resistors for simplifying BOM z Flexible LED display z Process: 85nm General Description z Package and operation temperature IP101G: dice, 0~70℃ IP101GA: 48LQFP, 0~70℃ IP101GR: 32QFN, 0~70℃ IP101GRI: 32QFN, -40~85℃ IP101G is an IEEE 802.3/802.3u compliant single-port Fast Ethernet T...