Broadband ADSL/VDSL DC Termination
INTEGRATED CIRCUITS DIVISION
Features
• Meets wetting (sealing) current requirements per ITU G.992.3 Annex 14.1 Region A...
Description
INTEGRATED CIRCUITS DIVISION
Features
Meets wetting (sealing) current requirements per ITU G.992.3 Annex 14.1 Region A
Integrated bridge rectifier for polarity correction Uses inexpensive optocoupler for DC sealing current
monitoring Electronic inductor, breakover, and latch circuits Current limiting and excess power protection circuits ADSL/VDSL compatible with low-pass filter network MLT and SARTS compatible Compatible with portable test sets Small SOIC or DFN Package DFN package 60 percent smaller than SOIC
Applications
ADSL/VDSL broadband modems Router and bridge customer premises equipment Leased line equipment Mechanized Loop Test (MLT) networks Switched Access Remote Test System (SARTS)
networks
Figure 1. CPC1466 Block Diagram
1 PR+ 2 NC 3 TIP
TC
16
Electronic
Inductor, Breakover,
NC
15
Latch, and
Opto Driver NC
14
4
NC
5 NC
Bridge Rectifier
RS 13 NC 12
6
RING
PD 11
7 NC
NC 10
Current Limit
and Excess
8 PR- Power Protection COM 9
CPC1466
Broadband ADSL/VDSL DC Termination IC
Description
The CPC1466 is a DC Termination IC for broadband ADSL/VDSL applications. The high-voltage, monolithic device provides a termination for DC wetting (sealing) current in customer premises equipment (CPE) to eliminate phone line corrosion on DSL twisted-pair copper lines without telephone voice services (i.e. only broadband services).
Internally, a bridge rectifier provides a polarity-insensitive DC termination for DSL loop sealing cu...
Similar Datasheet