Solar Cell. CPC1832NTR Datasheet

CPC1832NTR Cell. Datasheet pdf. Equivalent


IXYS CPC1832NTR
INTEGRATED CIRCUITS DIVISION
Parameter
Open Circuit Voltage
Short Circuit Current
Rating
8
50
* Direct sunlight (Approximately 6000 lux)
Units
V
A
Features
8V Output
Triggers with Natural Sunlight
Provides True Wireless Power
No EMI/RFI Generation
Wave Solderable
Replacement of Discrete Components
Solid State Reliability
Applications
Portable Electronics
Solar Battery Chargers
Battery Operated Equipment
Consumer Electronics
Off-Grid Installation
Wireless Sensors and Detection
Flame Detection
Self Powered Sunlight/ Light Detection
Self Powered Products
Remote Installation
CPC1832
8V Output Solar Cell
Description
The CPC1832 is a monolithic photovoltaic string
of solar cells on Silicon-On-Insulator (SOI). This
patented design allows for higher voltage solar cells
in a compact package. When operating in sunlight or
a bright artificial light environment, the optical energy
will activate the cell array, and generate a voltage at
the output. The solar cells are capable of generating a
floating source voltage and current sufficient to drive
and power CMOS ICs, logic gates, and/or provide
"trickle charge" for battery applications.
Ordering Information
Part #
CPC1832N
CPC1832NTR
Description
16-Pin Clear Molded SOIC Package (50/Tube)
16-Pin Clear Molded SOIC Package (1000/Reel)
Block Diagram
1
16 V+
8
9 V-
Pb
e3
DS-CPC1832-R04
www.ixysic.com
1


CPC1832NTR Datasheet
Recommendation CPC1832NTR Datasheet
Part CPC1832NTR
Description 8V Output Solar Cell
Feature CPC1832NTR; INTEGRATED CIRCUITS DIVISION Parameter Open Circuit Voltage Short Circuit Current Rating 8 50 * D.
Manufacture IXYS
Datasheet
Download CPC1832NTR Datasheet




IXYS CPC1832NTR
INTEGRATED CIRCUITS DIVISION
CPC1832
Absolute Maximum Ratings
Parameter
Reverse Voltage
Ratings
10
Operational Temperature
-40 to +85
Storage Temperature
-40 to +125
Electrical absolute maximum ratings are at 25°C
Units
V
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Electrical Characteristics
Parameter
Conditions
Symbol
Min
Typ
Max Units
Output Characteristics @ 25°C
Open Circuit Voltage
Short Circuit Current
Direct Sun (6000 lux)
VOC
High Intensity Lamp
VOC
Direct Sun (6000 lux)
ISC
-
8.5
-
V
-
10
-
V
-
50
-
A
PERFORMANCE DATA*
Normalized Open Circuit Output Voltage
vs. Light Intensity
16
14
12
10
8
6
4
2
0
0
2
4
6
8
10
Light Intensity (lux X 1000)
Normalized Short Circuit Output Current
vs. Light Intensity
200
180
160
140
120
100
80
60
40
20
0
0
2
4
6
8
10
Light Intensity (lux X 1000)
Normalized Open Circuit Output Voltage
vs. Incident Angle of Light
to Photodiode Surface
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
20
40
60
80
100
Incident Angle (Degrees)
Normalized Short Circuit Output Current
vs. Incident Angle of Light
to Photodiode Surface
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
20
40
60
80
100
Incident Angle (Degrees)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
2
www.ixysic.com
R04



IXYS CPC1832NTR
INTEGRATED CIRCUITS DIVISION
CPC1832
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
CPC1832N
Moisture Sensitivity Level (MSL) Rating
MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
CPC1832N
Maximum Temperature x Time
260ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable, and the use of a short drying bake may be necessary. Chlorine-based or
Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be
used.
Pb
e3
R04
www.ixysic.com
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)