Document
INTEGRATED CIRCUITS DIVISION
Parameter Blocking Voltage Load Current On-Resistance (max)
Rating 400 0.35 5
Units
VP Arms
Features
• Power SIP Package • Handle Load Currents Up to 0.35Arms • High Reliability • Low Drive Power Requirements • Arc-Free With No Snubbing Circuits • 2500Vrms Input/Output Isolation • No EMI/RFI Generation • Flammability Rating UL 94 V-0
Applications
• Industrial Controls • Motor Control • Robotics • Medical Equipment—Patient/Equipment Isolation • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • IC Equipment • Home Appliances
CPC1973
Power SIP Relay
Description
IXYS Integrated Circuits brings OptoMOS® technology, reliability and compact size to a new family of high power solid state relays. As part of that family, the CPC1973 is a 1-Form-A solid state relay.
The CPC1973 employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation.
The optically coupled outputs, that use patented OptoMOS architecture, are controlled by a highly efficient infrared LED.
The combination of low on-resistance and high load current handling capabilities makes the relay suitable for a variety of high performance switching applications.
Approvals
• UL 508 Recognized Component: File # E69938 • CSA Certified Component: Certificate # 1172007
Ordering Information
Part #
Description
CPC1973Y 4-Pin (8-Pin Body) Power SIP Package (25 per tube)
Pin Configuration
DS-CPC1973-R05
12
3
4
-+
Switching Characteristics of Normally Open (Form A) Devices
Form-A
IF ILOAD
90% ton
10% toff
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
Absolute Maximum Ratings (@ 25˚ C)
Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation voltage Input to Output Operational Temperature Storage Temperature
Ratings 400 5 50 1 150 2400 2500
-40 to +85 -40 to +125
Units VP V mA A mW mW Vrms °C °C
1 Derate linearly 1.33 mw / ºC 2 Derate linearly 20 mw / ºC
Electrical Characteristics
Parameter Output Characteristics @ 25°C Load Current, Continuous Peak On-Resistance1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Input Characteristics @ 25°C Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Input/Output Characteristics @ 25°C Capacitance Input/Output
1 Measurement taken within 1 second of on time.
Thermal Characteristics
Parameter Thermal Impedance (junction to case)
Conditions
free air t<10ms IL=350mA VL=400V
IF=10mA, VL=10V
IL=350mA -
IF=10mA VR=5V VIO=0V, f=1MHz
Conditions -
CPC1973
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.
Typical values are characteristic of the device a.