Auxiliary Programmable Driver
INTEGRATED CIRCUITS DIVISION
Features
• Meets PC Card (PCMCIA) height requirements • Zero standby current • PCB real est...
Description
INTEGRATED CIRCUITS DIVISION
Features
Meets PC Card (PCMCIA) height requirements Zero standby current PCB real estate and cost savings Can be used with LITELINK II and LITELINK III parts
Compliance
TIA/EIA/IS-968 (FCC part 68) UL1950 UL60950 EN/IEC 60950-1 compliant EN55022B CISPR22B EN55024 TBR-21
Ordering Information
Part Number Description
CPC5601D
16-pin, 14-lead SOIC, 0.300” wide package, 50/Tube
CPC5601DTR
16-pin, 14-lead SOIC, 0.300” wide package, 1000/Reel
Figure 1. CPC5601 Block Diagram
RING 1
GND 2 INPUT 3
NC 6
Shift Register
Drivers
16 LED-
15 LED+ 14 VDDLINE
13 12 11 10 9 8
B1 B2 B3 B4 B5 B6
7 -BR
CPC5601 LITELINK™ Family
Auxiliary Programmable Driver IC
Description
The CPC5601 is a serially-programmed driver IC for use with IXYS Integrated Circuits Division’s LITELINK Silicon Data Access Arrangement (DAA) ICs. The CPC5601 allows host-equipment control of DAA characteristics for worldwide DAA implementations, avoiding multiple implementations with discrete component changes or “stuff” options. The small, low-profile package makes the CPC5601 ideal for 56K PC Card (PCMCIA) modems, PC motherboards, and softmodems.
The CPC5601 uses opto-electronics to maintain the isolation barrier required in the data access arrangement for connection of host devices to the public switched telephone network (PSTN).
The one-bit serial input of the CPC5601 recovers clocking information from the input signal to set bits in the shift register. Th...
Similar Datasheet