Photocouplers Photorelay
Photocouplers Photorelay
TLP171J
TLP171J
1. Applications
• Mechanical relay replacements • Security Systems • Private ...
Description
Photocouplers Photorelay
TLP171J
TLP171J
1. Applications
Mechanical relay replacements Security Systems Private Branch Exchanges (PBXs) Set-Top Boxes (STBs) Measuring Instruments
2. General
The TLP171J photorelay consists of a photo MOSFET optically coupled to an infrared LED. It is housed in a 4pin package with 2.54-mm lead pitch and 2.1-mm height. This photorelay requires 0.2 mA of LED current to turn it on. It is suitable for applications that need electrical power savings.
3. Features
(1) Package: SOP(2.54SOP4) (Height 2.1 mm, pitch 2.54 mm) (2) Normally opened (1-Form-A) (3) OFF-state output terminal voltage: 600 V (min) (4) Trigger LED current: 0.1 mA (max)(t≤1s)
0.2 mA (max)(t >1 s) (5) ON-state current: 70 mA (max) (6) ON-state resistance: 60 Ω (max) (7) Isolation voltage: 1500 Vrms (min) (8) Safety Standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5 (Note 1) Note 1: When a VDE approved type is needed, please designate the Option (V4).
4. Packaging and Pin Assignment
11-5H1S
1: Anode 2: Cathode 3: Drain 4: Drain
©2017-2019 Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2012-10
2019-11-20 Rev.4.0
5. Internal Circuit
TLP171J
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol Note
Rating
Unit
LED Input forward current
IF
30
mA
Input forward current derating
(Ta ≥ 25 )...
Similar Datasheet