Photocoupler Photorelay
Photocouplers Photorelay
TLP220A
TLP220A
1. Applications
• Mechanical relay replacements • Security Systems • Measurin...
Description
Photocouplers Photorelay
TLP220A
TLP220A
1. Applications
Mechanical relay replacements Security Systems Measuring Instruments Factory Automation (FA) Amusement Equipment Smart Meters Electricity Meters
2. General
The TLP220A photorelay consists of a photo MOSFET optically coupled to an infrared LED. It is housed in a 4pin DIP package. It provides an isolation voltage of 5000 Vrms, making it suitable for applications that require reinforced insulation.
3. Features
(1) Normally open (1-Form-A) (2) OFF-state output terminal voltage: 60 V (min) (3) Trigger LED current: 2 mA (max) (4) ON-state current: 500 mA (max) (5) ON-state resistance: 2 Ω (max) (6) Isolation voltage: 5000 Vrms (min) (7) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory
Note 1: When a VDE approved type is needed, please designate the Option (D4).
©2017-2019 Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2011-09
2019-11-21 Rev.5.0
4. Packaging and Pin Assignment
11-5B2S
5. Internal Circuit
TLP220A
1: Anode 2: Cathode 3: Drain 4: Drain
6. Mechanical Parameters
Characteristics
Creepage distances Clearance distances Internal isolation thickness
7.62-mm Pitch TLP220A 7.0 (min) 7.0 (min) 0.4 (min)
10.16-mm Pitch TLP220AF
Unit
8.0 (min)
mm
8.0 (min)
0.4 (min)
©2017-2019 Toshiba Electronic Devices &...
Similar Datasheet