Photocoupler Photorelay
Photocouplers Photorelay
TLP220GAF
TLP220GAF
1. Applications
• Mechanical relay replacements • Security Systems • Meas...
Description
Photocouplers Photorelay
TLP220GAF
TLP220GAF
1. Applications
Mechanical relay replacements Security Systems Measuring Instruments Factory Automation (FA) Amusement Equipment Smart Meters Electricity Meters
2. General
The TLP220GAF photorelay consists of a photo MOSFET optically coupled to an infrared LED. It is housed in a 4-pin DIP package. It provides an isolation voltage of 5000 Vrms, making it suitable for applications that require reinforced insulation.
3. Features
(1) Normally opened (1-Form-A) (2) OFF-state output terminal voltage: 400 V (min) (3) Trigger LED current: 2 mA (max) (4) ON-state current: 120 mA (max) (5) ON-state resistance: 28 Ω (max, t < 1s) (6) ON-state resistance: 35 Ω (max, Continuous) (7) Isolation voltage: 5000 Vrms (min) (8) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Note 1: When a VDE approved type is needed, please designate the Option (D4).
4. Packaging and Pin Configuration
11-5B202S
©2017-2019 Toshiba Electronic Devices & Storage Corporation
1
1: Anode 2: Cathode 3: Drain 4: Drain
Start of commercial production
2011-09 2019-11-21
Rev.4.0
5. Internal Circuit
TLP220GAF
Fig. 5.1 Internal Circuit
6. Mechanical Parameters
Characteristics
Creepage distances Clearance distances Internal isolation thickness
7.62-mm Pitch TLP220GA 7.0 (min) 7.0 (min) 0.4 (min)
10.1...
Similar Datasheet