Photocoupler Photorelay
TOSHIBA Photocoupler Photorelay
TLP225A
Programmable Controllers I/O Board Interface DC-Output Module Replacement for DC...
Description
TOSHIBA Photocoupler Photorelay
TLP225A
Programmable Controllers I/O Board Interface DC-Output Module Replacement for DC Mechanical Relay
TLP225A
Unit: mm
The TOSHIBA TLP225A consists of an infrared emitting diode optically coupled to a photo-MOSFET in a four lead plastic DIP package (DIP4).
The TLP225A is MOSFET output and can control a current of 0.5 A which is suitable for DC output module.
Peak off-state voltage: 60 V (min) Trigger LED current: 5 mA (max) On-state current: 0.5 A (max) On-state resistance: 1.1 Ω (max) Isolation voltage: 2500 Vrms (min) UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A
File No.E67349
Pin Configuration (top view)
TOSHIBA
11-5B2S
Weight: 0.27 g (typ.)
1
4
2
3
1: Anode 2: Cathode 3: Source 4: Drain
© 2019
1
Toshiba Electronic Devices & Storage Corporation
Start of commercial production
1993-06
2019-06-17
Absolute Maximum Ratings (Ta = 25°C)
TLP225A
Characteristics
Symbol
Rating
Unit
Forward current
Forward current derating (Ta ≥ 53°C)
Peak forward current (100 μs pulse, 100 pps)
LED
Reverse voltage
Diode power dissipation
Diode power dissipation derating (Ta ≥ 53°C )
Junction temperature
Off-state output terminal voltage
On-state current
On-state current derating (Ta ≥ 25°C) Detector
Output power dissipation
Output power dissipation derating (Ta ≥ 25°C)
Junction temperature
Storage temperature range
Operating temperature range
Lead soldering temperatu...
Similar Datasheet