Photocouplers
Photocouplers Infrared LED & Photo Triac
TLP3062A,TLP3062AF
TLP3062A,TLP3062AF
1. Applications
• Solid-State Relays • ...
Description
Photocouplers Infrared LED & Photo Triac
TLP3062A,TLP3062AF
TLP3062A,TLP3062AF
1. Applications
Solid-State Relays Triac Drivers Home Electric Appliances Office Equipment
2. General
The TLP3062A consists of a zero crossing photo triac, optically coupled to an infrared LED. The TLP3062A is housed in the DIP6 package and guarantees insulation thickness of 0.4 mm (min). Therefore, the TLP3062A meets the reinforced insulation class requirements of international safety standards.
3. Features
(1) Halogen-free For details, see "Devices in Halogen-Free Resin Packages" at the end of this datasheet.
(2) Peak off-state voltage: 600 V (min) (3) Zero crossing functionary (ZC) (4) Trigger LED current: 10 mA (max) (5) On-state current: 100 mA (max) (6) Isolation voltage: 5000 Vrms (min) (7) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Note 1: When a VDE approved type is needed, please designate the Option (D4).
Table 3.1 Mechanical Parameters
Characteristics Creepage distances
7.62 mm Pitch TLP3062A
7.0 (min)
10.16 mm Pitch TLP3062AF
Unit
8.0 (min)
mm
Clearance distances
7.0 (min)
8.0 (min)
Internal isolation thickness
0.4 (min)
0.4 (min)
©2016-2019 Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2015-08
2019-11-18 Rev.9.0
4. Packaging (Note)
TLP3062A
TLP3062A...
Similar Datasheet