Photocoupler Photorelay
Photocouplers Photorelay
TLP3145
TLP3145
1. Applications
• ATE (Automatic Test Equipment) • Measuring Instruments • Fa...
Description
Photocouplers Photorelay
TLP3145
TLP3145
1. Applications
ATE (Automatic Test Equipment) Measuring Instruments Factory Automation (FA) I/O Interface Boards Mechanical relay replacements
2. General
The TLP3145 photorelay consists of a photo MOSFET optically coupled to an infrared LED. It is housed in a 4pin package with 2.54-mm lead pitch and 2.1-mm height. The TLP3145 is a bi-directional switch, which can replace mechanical relays in many applications. And its high on-state maximum rating current even with medium voltage of 200 V and low on-state resistance is suitable to control a power line.
3. Features
(1) Package: SOP (2.54SOP4) (Height 2.1 mm, pitch 2.54 mm) (2) Normally opened (1-Form-A) (3) OFF-state output terminal voltage: VOFF = 200 V (4) Trigger LED current: 3 mA (max) (5) ON-state current: 0.4 A (max) (6) ON-state resistance: 2.0 Ω (max) (7) Off-state capacitance: 100 pF (typ.) (8) Off-state current: 1 µA (max)@VOFF = 200V (9) Isolation voltage: 1500 Vrms (min) (10) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349
4. Packaging and Pin Assignment
11-5H1S
©2017-2020 Toshiba Electronic Devices & Storage Corporation
1
1: Anode 2: Cathode 3: Drain 4: Drain
Start of commercial production
2017-10 2020-01-10
Rev.2.0
5. Internal Circuit
TLP3145
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol Note
Rating
Unit
LED Input forward...
Similar Datasheet