TLP3548

Photocouplers Photorelay TLP3548,TLP3548F TLP3548,TLP3548F 1. Applications Mechanical relay replacements Factory Automation (FA) Programmable Logic Controllers (PLCs) Measuring Instruments ATE (Automatic Test Equipment) 2. General The TLP3548 and TLP3548F photorelay consist of a photo MOSFET optically coupled to an infrared LED. It is housed in a 8-pin DIP package. The low ON-state resistance and the high permissible ON-state current of the TLP3548 and TLP3548F make it suitable for power line control applications. 3. Features (1) Normally opened (1-Form-A) (2) OFF-state output terminal voltage: 400 V (min) (3) Trigger LED current: 1 mA (max) (4) ON-state current: 0.4 A (max) (A connection) (5) ON-state resistance: 5 Ω (max) (A connection) (6) Isolation voltage: 2500 Vrms (min) (7) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 UL-recognized: UL 508, File No.E499232 (Note 1) VDE-approved: EN 60747-5-5 (Note 2) Note 1: Please refer Absolute Maximum Ratings (UL-recognized UL 508) for UL 508 products. Note 2: When a VDE approved type is needed, please designate the Option (D4). 4. Mechanical Parameters Characteristics Creepage distances Clearance distances Internal isolation thickness 7.62-mm Pitch TLP3548 7.0 (min) 7.0 (min) 0.4 (min) 10.16-mm Pitch TLP3548F Unit 8.0 (min) mm 8.0 (min) 0.4 (min) ©2016-2019 Toshiba Electronic Devices & Storage Corporation 1 Start of commercial pr...