Photocouplers
Photocouplers Infrared LED & Photo Diode
TLP3906
TLP3906
1. Applications
• Measuring Instruments • MOSFET Gate Drivers...
Description
Photocouplers Infrared LED & Photo Diode
TLP3906
TLP3906
1. Applications
Measuring Instruments MOSFET Gate Drivers
2. General
The TLP3906 is a photocoupler in the SO6 package that consists of an infrared LED optically coupled to a photodiode array. The photodiodes are connected in series, making the TLP3906 suitable for MOS gate drive applications.
3. Features
(1) Open voltage: 7 V (min) (2) Short current: 12 µA (min) (3) Isolation voltage: 3750 Vrms (min) (4) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) Note 1: When a VDE approved type is needed, please designate the Option (V4).
Table Short-Circuit Current (Note) (Unless otherwise specified, Ta = 25 )
Rank
ISC Rank Marking
Test Condition
Short-Circuit Current ISC (min)
Unit
C20 None
C C, Blank
IF = 10 mA IF = 10 mA
20
µA
12
Note:
Specify both the part number and a rank in this format when ordering. Example: TLP3906(C20) For safety standard certification, however, specify the part number alone. Example: TLP3906(C20,E → TLP3906
4. Packaging and Pin Assignment
11-4M1S
©2019 Toshiba Electronic Devices & Storage Corporation
1
1: Anode (Input) 3: Cathode (Input) 4: Cathode (Output) 6: Anode (Output)
Start of commercial production
2014-02 2019-12-22
Rev.3.0
5. Mechanical Parameters
TLP3906
Characteristics
Creepage distances Clearance Internal isolation thickness
Min
Unit
5...
Similar Datasheet