TC74VHCV374FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VHCV374FK
Octal Schmitt D-Type Flip Flop wi...
TC74VHCV374FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VHCV374FK
Octal Schmitt D-Type Flip Flop with 3-State Output
The TC74VHCV374FK is an advanced high speed CMOS OCTAL FLIPFLOP with 3-STATE OUTPUT fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar
Schottky TTL while maintaining the CMOS low power dissipation. This 8-bit D-type flip-flop is controlled by a clock input (CK) and an output enable input ( OE ). When the OE input is high, the eight outputs are in a high impedance state. Input pin have hysteresis between the positive-going and negative-going thresholds. Thus the TC74VHCV374FK are capable of squaring up transitions of slowly changing input signals and provides an improved noise immunity. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the supply voltage. These structure prevents device destruction due to mismatched supply and input/output voltages such as battery back up, hot board insertion, etc.
Note: Output in off-state
Features
High speed: fmax = 185 MHz (typ.) at VCC = 5 V Low power dissipation: ICC = 2 μA (max) at Ta = 25°C Wide operating voltage range: VCC (opr) = 1.8 V to 5.5 V Ouput current: |IOH|/IOL = 16 mA (min) (VCC = 4.5 V) Available in VSSOP (US) Power-down protection provided on all inputs and outputs Pin and function compatible with the 74 series
(74AC/VHC/HC/F/ALS/LS etc...