Low-Power 4-Bit Dual-Supply Bus Switch
TC7QPB9306FT,TC7QPB9307FT
CMOS Digital Integrated Circuits Silicon Monolithic
TC7QPB9306FT,TC7QPB9307FT
1. Functional De...
Description
TC7QPB9306FT,TC7QPB9307FT
CMOS Digital Integrated Circuits Silicon Monolithic
TC7QPB9306FT,TC7QPB9307FT
1. Functional Description
Low-Voltage, Low-Power 4-Bit Dual-Supply Bus Switch
2. General
The TC7QPB9306FT and TC7QPB9307FT are CMOS 4-bit dual-supply bus switches that can provide an interface between two nodes at different voltage levels. These devices can be connected to two independent power supplies. VCCA supports 1.8 V, 2.5 V and 3.3 V power supplies, whereas VCCB supports 2.5 V, 3.3 V and 5.0 V power supplies. Bidirectional level-shifting is possible by simply adding external pull-up resistors between the An/Bn data lines and the VCCA / VCCB supplies. There is no restriction on the relative magnitude of the An and Bn voltages; both the An and Bn data lines can be pulled up to arbitrary power supplies. The enable signal can be used to disable the device so that the buses are effectively isolated. The Output Enable (OE:TC7QPB9306FT, OE:TC7QPB9307FT) input is common for all the 4-bits of the data lines; thus these device are used as a single 4-bits bus switch. For the TC7QPB9306FT, Output Enable (OE) is active-High: When OE is High, the switch is on; when Low, the switch is off. For the TC7QPB9307FT, Output Enable (OE) is active-Low: When OE is Low, the switch is on; when High, the switch is off. The TC7QPB9306FT and TC7QPB9307FT supports power-down protection at the OE, OE input, with OE, OE being 5.5 V tolerant. The channels consist of n-type MOSFETs. All the inputs ...
Similar Datasheet