1000W Transient Voltage Suppressors
1.0SMBJ5.0CA Thru 1.0SMBJ75CA
1000W Transient Voltage Suppressors
TVS Diodes - 1000W > 1.0SMBJ Series
Description
The ...
Description
1.0SMBJ5.0CA Thru 1.0SMBJ75CA
1000W Transient Voltage Suppressors
TVS Diodes - 1000W > 1.0SMBJ Series
Description
The 1.0SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
For surface mounted applications in order to optimize board space Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps from 0 Volts to VBR min Glass passivated junction Low inductance
Package: DO-214AA / SMB
Applications
I/O interface AC/DC power supply Low frequency signal transmission line (RS232, RS485, etc.)
Electrical Characteristics
Parameter
Symbol
Value
Unit
Peak Pulse Power Dissipation at TA=25℃ by 10x1000μs waveform (Fig.1)(Note 1), (Note 2) Power Dissipation on infinite heat sink at TA=50℃
PPPM
1000
W
PM(AV)
5
W
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
IFSM
100
A
Operating Junction and Storage Temperature Range
TJ, TSTG
-55 to 150
℃
Typical Thermal Resistance Junction to Lead
RθJL
20
℃/W
Typical Thermal Resistance Junction to Ambient
RθJA
100
℃/W
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2. 2. 2. Mounted on 5.0mm×5.0mm (0.03mm thick) copper pads to each terminal. 3. 3. 8.3ms single half sine-wave, or equivalent square ...
Similar Datasheet