RGB/LVDS-to-eDP Converter
NewCoSemi
NCS8801
Datasheet
RGB/LVDS-to-eDP Converter
1 Features
Embedded-DisplayPort (eDP) Output 2-lane/4-lane eDP...
Description
NewCoSemi
NCS8801
Datasheet
RGB/LVDS-to-eDP Converter
1 Features
Embedded-DisplayPort (eDP) Output 2-lane/4-lane eDP @ 1.62/2.7Gbps per lane FHD to WQXGA (2560*1600) supported Up to 6dB pre-emphasis
RGB Input 18/24bit RGB Interface Pixel clock up to 270MHz SDR/DDR supported Pin order reversal supported
LVDS Input Dual-channel 6/8bit LVDS (Sync) interface 400Mbps to 1Gbps per data pair Built-in termination Channel and polarity swap supported
Reference Clock Any freq. between 19MHz and 100MHz Crystal or single-ended clock input Built-in 5000ppm SSC generator
Misc I2C/SPI for chip configuration Built-in eDP handshake protocol I2C-AUX channel for TCON/DPCD/EDID
control Built-in video test pattern
Power 1.2V core supply 2.5V or 3.3V IO supply RGB IO can go down to 1.8V Power consumption ~ 70mW @ 2048*1536*24bit*60Hz, LVDS mode Deep-sleep mode power <1mW
Package QFN-56 (7mm x 7mm) package RoHS Compliant
2 Block Diagram
LVDIE[3:0]P/N LVCIEP/N
LVDIO[3:0]P/N LVCIOP/N PCLK HSYNC VSYNC DE D[23:0]
SDA SCL
CSB SCK MOSI MISO
TEL:13590407479 QQ:2850 399 698
V1.1 NewCoSemi Technology Proprietary & Confidential
XTAL_IN XTAL_OUT
AVDD33 XVDD33 HSVDD33 DVDD33 AVDD12 DVDD12 DVDD12
DPO0P/N
DPO1P/N DPO2P/N
DPO3P/N DPAUXP/N
RESETB PWD I2CSEL TEST GND
Page 1
NewCoSemi
NCS8801
Datasheet
3 General Description
NCS8801 is an ultra-low-power RGB/LVDS-to-DisplayPort/eDP converter, which is designed for mobile devices including smartphones, tablets, laptops, etc. to support high-definition DP...
Similar Datasheet