Cascadable Amplifier
A61 / SMA61
Cascadable Amplifier 2 to 6 GHz
Features
WIDE BANDWIDTH: 2-6 GHz MEDIUM OUTPUT LEVEL: +12.5 dBm (TYP.)...
Description
A61 / SMA61
Cascadable Amplifier 2 to 6 GHz
Features
WIDE BANDWIDTH: 2-6 GHz MEDIUM OUTPUT LEVEL: +12.5 dBm (TYP.) LOW NOISE: 3.2 dB (TYP.)
Description
The A61 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage GaAs FET feedback amplifier design displays impressive performance characteristics over a broadband frequency range. An RF choke is used for DC power supply decoupling. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Product Image
Rev. V3
Part Number
A61 SMA61 CA61 **
Package
TO-8 Surface Mount SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50, VCC = +5 VDC
Absolute Maximum Ratings
Parameter
Frequency Small Signal Gain (min)
Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output
@ 1 dB comp. (min) IP3
Units
GHz dB dB dB dB dBm dBm
Typical 25ºC 1.8-6.2 7.5 ±0.4 14 3.2 12.5 +25
Guaranteed
0º to 50ºC -54º to +85ºC*
2.0-6.0
2.0-6.0
6.5
6.0
±0.7
±0.9
4.3
4.8
11.0
10.5
Parameter
Absolute Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+6 V
Continuous Input Power
13 dBm
Short Term Input power (1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.25 W
“S” Series Burn-In Temperature (case)
+125ºC
Thermal Data: VCC = +5 VDC
IP2
dBm
+37
Parameter
R...
Similar Datasheet