NTP-8910A

NEOFIDELITY NTP8910A High Performance, High Fidelity Power Driver Integrated Full Digital Audio Amplifier Datasheet Preliminary ver. 0.1 NEOFIDELITY, INC. NTP8910A Power Driver Integrated Full Digital Audio Amplifier General Description The NTP8910A is a single chip full digital audio amplifier including power stage for stereo amplifier system. NTP8910A is integrated with versatile digital audio signal processing functions, high-performance, highfidelity fully digital PWM modulator and two high-power full-bridge MOSFET power stages. The NTP8910A receives digital serial audio data with sampling frequencies of 32kHz, 44.1kHz, 48kHz, and 96kHz. It delivers 2 x 10 watts in stereo mode without heat sink. The NTP8910A has a mixer and Bi-Quad filters which can be used to implement the essential audio signal processing functions like loudness control, compensation of a loud speaker response and parametric equalization. All the functions of the NTP8910A can be controlled by internal register values via I2C host interface bus. Package Features  2 CH Stereo (10W x 2 BTL)  Wide Operating Supply Voltage Range (4.5V to 20V)  SDATA Generator (I2S output)  Floating Point Operation  32 Programmable Bi-Quad Filters  Speaker Compensation  LPF, HPF, DC Cut  Advanced Parametric Equalizer  IBB(Intelligent BASS Boost)  3 Band Dynamic Range Control  RS(Reinforced Sound) DRC  Loudness Control  Protection Circuit  OCP(Over Current Protection)  OTP(Over Temperature Protection)  UVP(...