DP83TG720S-Q1

DP83TG720S-Q1 SNLS604D – SEPTEMBER 2020 – REVISED MARCH 2021 DP83TG720S-Q1 1000BASE-T1 Automotive Ethernet PHY 1 Features IEEE802.3bp 1000BASE-T1 compliant Open Alliance TC12 Interoperability and EMC compliant – Interoperability tested with OA/IEEE compliant PHYs – EMC immunity Class-IV compliant for UTP (unshielded twisted pair) Integrated LPF on MDI pins MAC Interfaces: RGMII and SGMII Supported I/O voltages: 3.3 V, 2.5 V, and 1.8 V Pin compatible with TI's 100BASE-T1 PHY – Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change Power savings features: – standby and sleep – local and remote wake-up Diagnostic tool kit – high accuracy temperature monitor – voltage monitor – ESD event monitor – Data throughput calculator : inbuilt MAC packet generator, counter and error checker – link quality monitoring – cable open and short fault detection – loopback modes 25MHz clock output source VQFN, wettable flank packaging AEC-Q100 Qualified – Inbuilt ESD protection : IEC61000-4-2 ESD : ±8-kV contact discharge – Device temperature grade 1: –40°C to +125°C ambient operating temperature 2 Applications Telematics control unit (TCU, TBOX) Gateway and body control ADAS: LIDAR, RADAR, Front Camera 3 Description The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver. It provides all physical layer functions needed to transmit and receive data over unshielded/shielded single tw...