HEX INVERTER. SN74AC04-EP Datasheet

SN74AC04-EP INVERTER. Datasheet pdf. Equivalent

SN74AC04-EP Datasheet
Recommendation SN74AC04-EP Datasheet
Part SN74AC04-EP
Description HEX INVERTER
Feature SN74AC04-EP; SN74AC04ĆEP HEX INVERTER D Controlled Baseline − One Assembly/Test Site, One Fabrication Site D Ext.
Manufacture etcTI
Datasheet
Download SN74AC04-EP Datasheet




etcTI SN74AC04-EP
SN74AC04ĆEP
HEX INVERTER
D Controlled Baseline
− One Assembly/Test Site, One Fabrication
Site
D Extended Temperature Performance of
−55°C to 125°C
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product-Change Notification
D Qualification Pedigree
Component qualification in accordance with JEDEC and industry
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life. Such qualification
testing should not be viewed as justifying use of this component
beyond specified performance and environmental limits.
SCAS717 − OCTOBER 2003
D 2-V to 6-V VCC Operation
D Inputs Accept Voltages to 6 V
D Max tpd of 7 ns at 5 V
D PACKAGE
(TOP VIEW)
1A 1
1Y 2
2A 3
2Y 4
3A 5
3Y 6
GND 7
14 VCC
13 6A
12 6Y
11 5A
10 5Y
9 4A
8 4Y
description/ordering information
The SN74AC04 contains six independent inverters. The device performs the Boolean function Y = A.
ORDERING INFORMATION
TA
PACKAGE‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
−55°C to 125°C SOIC − D
Tape and reel SN74AC04MDREP
SAC04MEP
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
FUNCTION TABLE
(each inverter)
INPUT
A
OUTPUT
Y
H
L
L
H
logic diagram, each inverter (positive logic)
A
Y
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright 2003, Texas Instruments Incorporated
1



etcTI SN74AC04-EP
SN74AC04ĆEP
HEX INVERTER
SCAS717 − OCTOBER 2003
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA
Package thermal impedance, θJA (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
Storage temperature range, Tstg (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
3. Long-term high−temperature storage and/or extended use at maximum recommended operating conditions may result in a
reduction of overall device life. See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging.
recommended operating conditions (see Note 4)
MIN MAX UNIT
VCC Supply voltage
VIH
High-level input voltage
VIL
Low-level input voltage
VI
Input voltage
VO
Output voltage
IOH
High-level output current
IOL
Low-level output current
t /v Input transition rise or fall rate
VCC = 3 V
VCC = 4.5 V
VCC = 5.5 V
VCC = 3 V
VCC = 4.5 V
VCC = 5.5 V
VCC = 3 V
VCC = 4.5 V
VCC = 5.5 V
VCC = 3 V
VCC = 4.5 V
VCC = 5.5 V
2
6V
2.1
3.15
V
3.85
0.9
1.35 V
1.65
0 VCC V
0 VCC V
−12
−24 mA
−24
12
24 mA
24
8 ns / V
TA
Operating free-air temperature
−55 125 °C
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265



etcTI SN74AC04-EP
SN74AC04ĆEP
HEX INVERTER
SCAS717 − OCTOBER 2003
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
VOH
VOL
II
ICC
Ci
IOH = −50 µA
IOH = −12 mA
IOH = −24 mA
IOL = 50 µA
IOL = 12 mA
IOL = 24 mA
VI = VCC or GND
VI = VCC or GND,
VI = VCC or GND
IO = 0
VCC
3V
4.5 V
5.5 V
3V
4.5 V
5.5 V
3V
4.5 V
5.5 V
3V
4.5 V
5.5 V
5.5 V
5.5 V
TA = 25°C
MIN TYP MAX
2.9 2.99
4.4 4.49
5.4 5.49
2.56
3.86
4.86
0.002 0.1
0.001 0.1
0.001 0.1
0.36
0.36
0.36
± 0.1
2
2.8
MIN MAX UNIT
2.9
4.4
5.4
V
2.4
3.7
4.7
0.1
0.1
0.1
V
0.5
0.5
0.5
±1 µA
40 µA
pF
switching characteristics over recommended operating free-air temperature range,
VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TA = 25°C
MIN TYP MAX
MIN MAX UNIT
tPLH
A
tPHL
1.5 4.5
9
1
11
Y
ns
1.5 4.5 8.5
1
10
switching characteristics over recommended operating free-air temperature range,
VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TA = 25°C
MIN TYP MAX
MIN MAX UNIT
tPLH
A
tPHL
1.5
4
7
1 8.5
Y
ns
1.5 3.5 6.5
1 7.5
operating characteristics, VCC = 5 V, TA = 25°C
PARAMETER
Cpd Power dissipation capacitance
TEST CONDITIONS
CL = 50 pF,
f = 1 MHz
TYP UNIT
45 pF
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)