TPS768xxQ
www.ti.com
SLVS211L – JUNE 1999 – REVISED JANUARY 2006
FAST TRANSIENT RESPONSE, 1-A LOW-DROPOUT VOLTAGE REG...
TPS768xxQ
www.ti.com
SLVS211L – JUNE 1999 – REVISED JANUARY 2006
FAST TRANSIENT RESPONSE, 1-A LOW-DROPOUT VOLTAGE
REGULATORS
FEATURES
Input Voltage Range: 2.7 V to 10 V Low-Dropout Voltage: 230 mV typical at 1 A
(TPS76850) 2% Tolerance Over Specified Conditions for
Fixed-Output Versions Open Drain Power Good (See TPS767xx for
Power-On Reset With 200-ms Delay Option) Ultralow 85 µA Typical Quiescent Current Available in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V,
3.0-V, 3.3-V, 5.0-V Fixed Output and Adjustable (1.2 V to 5.5 V) Versions Fast Transient Response Thermal Shutdown Protection SOIC-8 (D) and TSSOP-20 (PWP) Package
D PACKAGE (Top View)
GND 1 EN 2 IN 3 IN 4
8 PG 7 FB/NC 6 OUT 5 OUT
PWP PACKAGE (Top View)
GND/HSINK 1 GND/HSINK 2
GND 3 NC 4 EN 5 IN 6 IN 7 NC 8
GND/HSINK 9 GND/HSINK 10
20 GND/HSINK 19 GND/HSINK 18 NC 17 NC 16 PG 15 FB/NC 14 OUT 13 OUT 12 GND/HSINK 11 GND/HSINK
DESCRIPTION
This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a
reasonable cost.
Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). ...