BDS/GPS/GNSS INTEGRATED FRONT-END
AW5105DNR
Mar 2018 V1.1
BDS/GPS/GNSS INTEGRATED FRONT-END MODULE WITH LOW NOISE AMPLIFIER AND FILTER
FEATURES
GENERAL...
Description
AW5105DNR
Mar 2018 V1.1
BDS/GPS/GNSS INTEGRATED FRONT-END MODULE WITH LOW NOISE AMPLIFIER AND FILTER
FEATURES
GENERAL DESCRIPTION
l
Low Noise Figure: 1.7dB; High power gain: 17dB typical @ 1.575 GHz Low current consumption: 6.9mA RF input/output impedance 50ohm Supply voltage: 1.5V-3.6V Operation frequency range: 1550MHz-1615MHz
The AW5105 is a Front-End Module (FEM) with a
a fully integrated Low-Noise Amplifier and Pre-Filter
for BDS/GPS/GNSS. The AW5105 requires no
i external capacitor/inductor, reduces assembly t complexity and the PCB area, enabling a n cost-effective solution.
Small DFN (6-pin, 1.5mm x 1.0 mm) package 3kV HBM ESD protection (including RFIN and
RFOUT pin) High Out-Of-Band jammer rejection at
Cellular/PCS/WLAN bands Fully-integrated module without any component
at input/output side
The AW5105 achieves low noise figure, high gain, excellent linearity and high Out-Of-Band rejection.
e All these feature make AW5105 an excellent
choice for GNSS LNA as it improves sensitivity with low noise figure and high gain, provides better
d immunity against out-of-band jammer signals with i high linearity, and reduces filtering requirement of f preceding stage and hence reduces the overall ncost of the GNSS receiver.
APPLICATIONS
Small phones, Feature Phones;
oThe AW5105 is provided in a compact 1.5mm x 1.0mm, 6-pin DFN package.
Tablet PCs; Personal Navigation Devices;
C
ic Complete GPS/BDS chipset modules;
Theft protection(la...
Similar Datasheet