AW32405

AW32405 May 2019 V1.0 Over-Voltage Protection Load Switch with Surge Protection Features General Description  Surge protection The AW32405 OVP load switch features surge  IEC 61000-4-5: ±100V  Integrated low Rdson nFET switch: typical 13mΩ protection, an internal clamp circuit protects the device from surge voltages up to ±100V. l  6A continuous current capability  Default Over-Voltage Protection (OVP) threshold  AW32405: 6.8V  OVP threshold adjustable range: 4V to 20V  Input system ESD protection tia The AW32405 features an ultra-low 13mΩ (typ.) Rdson nFET load switch. When input voltage exceeds the OVP threshold, the switch is turned off very fast to prevent damage to the protected downstream devices. The IN pin is capable of  IEC 61000-4-2 Contact discharge: ±8kV  IEC 61000-4-2 Air gap discharge: ±15kV n withstanding fault voltages up to 35VDC. The default OVP threshold is 6.8V, the OVP  Input maximum voltage rating: 35VDC  Fast turn-off response: typical 50ns  Over-Temperature Protection (OTP)  Under-Voltage Lockout (UVLO)  WLCSP 1.215×1.775-12B package Applications  Smartphones  Tablets  Charging Ports e threshold can be adjusted from 4V to 20V through external OVLO pin. fid The device features an open-drain output ACOK, when VIN_UVLO < VIN < VIN_OVLO and the switch is on, ACOK will be driven low to indicate a good power input, otherwise it is high impedance. nThis device features over-temperature protection that prevents itself from therm...